KEENPACE specializes in the production and sales of through-type shelves, which are a continuous whole shelf that is not divided by aisles. On the supporting rails, the pallets are stored in the depth direction, one by one, which makes high-density storage possible. Drive-in racks are suitable for the storage of small varieties and large quantities of goods. They are often used to store large quantities of goods of the same type. They have a higher space utilization. They are suitable for occasions with high storage space costs such as food industry, chemical industry, clothing industry, and cold storage , The storage cost per unit site is relatively low.
Through-type racks can be divided into one-way and two-way arrangements according to the pick-up direction. The total depth of the one-way (wall area) shelf is preferably controlled within the depth of 6 pallets, and the total depth of the two-way shelf area (the middle area can be picked up on both sides) It is well controlled within the depth of 12 pallets to improve the efficiency and reliability of forklift access (in this kind of racking system, the forklift is a continuous "lifting high" operation method, and the forklift is easy to shake and hit the shelf, so stability is considered Adequacy is crucial). The stability of this kind of storage system is weak, the shelf should not be too high, usually should be controlled within 10 meters, and in order to strengthen the stability of the entire shelf system, in addition to larger specifications, selection, but also need to install a tensioning device. Single pallet goods should not be too large or heavy, usually the weight is controlled within 1500KG, and the pallet span should not be greater than 1.5 meters. Commonly equipped forklifts are forward-moving battery forklifts or counterbalanced battery forklifts.
Due to the denser goods stored in the through-type rack, the stability requirements are very high, so relatively more rack accessories are required. Through the connection of the accessories and the rack pillars, the goods can be safely and densely stored on the corbel beam, to the greatest extent Use space effectively.
The accessories of the drive-in rack include: corbel, corbel beam, top beam, top pull, back pull, foot guard, guard rail, etc.
Finally, KEENPACE reminds users that because the through-type racks require forklifts to drive into the racks to access the goods, the safety of personnel needs special attention.
