Light shelf: Light shelf, also known as lightweight shelf, angle steel shelf, universal angle steel shelf, KEENPACE is made of high-quality cold-rolled steel and section steel, and is made of steel laminates and universal angle steel profiles combined with angle codes and special pins. It has beautiful appearance and easy assembly. The steel laminate can be adjusted up and down at a distance of 60mm. Multiple groups of light shelves can be connected to increase the overall stability of the shelves.
Features of light shelves:
1. The light-duty rack laminates are welded with reinforcing ribs, and the layer load capacity is large. The maximum load capacity of each layer can reach 150kg/layer under the relative length.
2. The top and bottom layers of the light-duty racks are connected with the uprights by angle bracket screws, which are safe and stable. The single-layer plates are connected with the layer plates by special pins, which are simple to connect, simple and convenient, and can be adjusted at will.
3. The surface treatment of the light shelf adopts shot blasting table derusting, degreasing, and electrostatic powder spray treatment. It can be sprayed according to the color specified by the customer. It has the advantages of beautiful color, not easy to oxidize, and easy to clean.
4. Light-duty shelves are widely used in enterprise warehouses, supermarkets and public institutions, and the products are at the same time to reach the same level of products in developed countries.
5. Light-duty racks can also be added with anti-static facilities on the laminates, which can be made into anti-static racks and are now widely used in electronic companies.
6. Light-duty shelves in the same direction can also be bolted together to form a whole shelf.
The technology of the light shelf: The specification of the light shelf column is 45*50*1.5mm steel, which is made of high-quality strip steel, rolled by an automatic rolling mill, punched by a punch, and then cut according to the height specified by the customer. The light-duty shelf laminate is made of high-quality cold plate, flattened, slit, bent, and welded. The light shelf is an ideal alternative to replace the angle steel welded by the original enterprise and the simple shelf on the top. It has low cost, safety and reliability, simple disassembly and assembly, and can be used alone.
